Trackball - PS/2

If you're looking for a fun input device for your project this thing is a ball... really!
This trackball communicates via PS/2 just like your computer mouse (okay, like your old computer mouse) and provides X and Y axis control as well as three separate button-clicks (activated by pulling the included spade connectors to ground).
The ball itself is 5 cm in diameter, made from clear acrylic and lit from below by four LEDs: two green LEDs show that the trackball is powered, two red LEDs indicate a button-click. 

This thing is just begging to be hacked.
The 10x10x4 cm case simply snaps together and can be pulled apart with very little effort.
It also has a 31 mm mounting hole at each of it's four corners that drops all of the way through the case.

Note: The pinout for the button-click spade connectors is as follows: black is GND; white is right-click; yellow is left-click; and red is middle-click ('scroll-wheel' click).
The ground line has 3 spade connectors, one for each button.
They can be connected directly to our Concave Retro Gaming Buttons!

Dimensions: 10 x 10 cm, 4 cm tall without ball / 6 cm including ball.

Features:

• PS/2 interface
• 5 foot cable
• Left/Middle/Right-Click Button Leads
• Red and Green Status LEDs
• 2" Clear Acrylic Ball

Documents:

• Arduino Example
• PS/2 Pinout Diagram
• Roll-a-tone Example Code