SparkFun RedBoard - Programmed with Arduino

SparkFun RedBoard - Programmed with Arduino

Arduino Pro Mini 328 - 5V/16MHz

Arduino Pro Mini 328 - 5V/16MHz

Arduino Ethernet w/o PoE

NOK516.00
In stock
Only 2 left
SKU
DEV-11229

So you want your Arduino to surf the web but you don't have room for the Arduino board plus the Ethernet Shield. What do you do? How about giving the Arduino Ethernet a try? The Arduino Ethernet is an Arduino development board with the Wiznet Ethernet interface built in on the same board! It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack, an ICSP header, and a reset button.

 

An on-board microSD card reader, which can be used to store files for serving over the network, is accessible through the SD Library.
Pin 10 is reserved for the Wiznet interface, SS for the SD card is on Pin 4.

 

To make room for the Ethernet interface, they removed the USB-serial driver so you will need an FTDI breakout or similar device to upload your Arduino sketches. Also, Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs.

 

Note: Because of the height of the Ethernet Jack on this shield, you will need an extra set of stackable headers to get a shield to stack on top of it.

Features:

  • ATMega328 Microcontroller
  • Operating Voltage: 5V
  • Input Voltage: 7-12V
  • Digital I/O Pins: 14 (4 of which are used by the Ethernet controller)
  • Analog Input Pins: 6
  • On Board Micro SD Cardslot
  • W5100 TCP/IP Embedded Ethernet Controller

Documents:

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Comments

Please login to comment.

Don't have an account?

Sign Up for free