Mega Pro Mini Cable - 20 cm (8-wires)

This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini.
Pick up a few of these to break out all of those pesky pins.
Integrating these connectors into your projects makes it possible to quickly swap out a Mega Pro Mini between two or more different enclosures.
One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.

Note: It takes 10 of these cables to break out every pin on the Mega Pro Mini, so make sure that you order enough for your application.

Note: The color of these wires may change from batch to batch so be sure to check your pinouts!

Dimensions: 20 cm length

Documents:

• Connector